Boîte de vitesses ZF 3055 marine unused 3101003031 pour camping-car et caravane MAN D2862LE476





Si vous décidez d'acheter un véhicule ou du matériel à bas prix, assurez-vous que vous communiquez avec un vendeur réel. Cherchez autant d'informations sur le propriétaire que possible. Un escroc peut se faire passer pour une société réelle. En cas de doute, contactez-nous en utilisant le formulaire de commentaires afin que nous effectuions un contrôle supplémentaire.
Avant d'effectuer un achat, étudiez attentivement plusieurs offres de vente afin de connaître le coût moyen du modèle de véhicule ou d'équipement que vous avez choisi. Si le prix de l'offre qui vous intéresse est très inférieur aux offres similaires, réfléchissez bien. Une différence de prix considérable peut indiquer la présence de défauts cachés ou une tentative d'escroquerie.
N'achetez pas de produits dont le prix est trop différent du prix moyen de produits similaires.
Ne consentez pas à payer une caution ou une avance douteuse. En cas de doute, n’hésitez pas à demander des précisions, des photos et des documents supplémentaires, vérifier l'authenticité des documents ou encore poser des questions.
C'est l'arnaque la plus répandue. Des vendeurs malhonnêtes peuvent demander une avance sur le montant total pour « réserver » votre achat. De cette manière, ils peuvent recueillir un montant considérable, puis disparaître.
- Faire un prépaiement sur la carte
- N'effectuez pas de prépaiement sans établir de documents confirmant le transfert d'argent si le vendeur vous semble suspect au cours de vos échanges.
- Transfert de l'argent sur le compte séquestre
- Méfiez-vous de ce genre de demandes, il est très probable que vous soyez en train de communiquer avec un fraudeur.
- Virement sur le compte d'une société avec un nom similaire
- Soyez vigilant(e), des fraudeurs peuvent se faire passer pour des entreprises connues en introduisant des modifications mineures dans le nom. Ne transférez pas d'argent en cas de doute sur le nom de l'entreprise.
- Substitution de ses propres coordonnées dans la facture d'une entreprise réelle
- Avant d'effectuer le virement, vérifiez que les coordonnées indiquées sont exactes et qu'elles appartiennent à l'entreprise indiquée.
Coordonnées du vendeur


direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------