ZF 3055 marine unused 3101003031 versnellingsbak voor MAN D2862LE476 camper
Hörsching7279 km to "United States/Columbus"
Als u besluit een product tegen een lage prijs te kopen, zorg dan dat u communiceert met de echte verkoper. Ontdek zoveel mogelijk informatie over de eigenaar van het product. Een manier om vals te spelen is om jezelf te vertegenwoordigen als een echt bedrijf. In geval van verdenking, informeer ons hierover voor extra controle, via het feedbackformulier.
Voordat u besluit om een aankoop te doen, moet u zorgvuldig meerdere verkoopaanbiedingen bekijken om inzicht te krijgen in de gemiddelde kosten van uw gekozen product. Als de prijs van de aanbieding die u leuk vindt veel lager is dan vergelijkbare aanbiedingen, moet u dat tot nadenken zetten. Een aanzienlijk prijsverschil kan duiden op verborgen gebreken of een poging van de verkoper om frauduleuze handelingen te plegen.
Koop geen producten waarvan de prijs te veel afwijkt van de gemiddelde prijs voor vergelijkbare producten.
Geef geen toestemming voor dubieuze beloftes en vooruitbetaalde goederen. In geval van twijfel, wees niet bang om details te verduidelijken, vraag om extra foto's en documenten van het product, controleer de authenticiteit van de documenten, en stel vragen.
Dit is het meest voorkomende type van fraude. Oneerlijke verkopers kunnen een bepaald bedrag aan aanbetalingen vragen waarbij u het product "reserveert". Zo kunnen fraudeurs een groot bedrag verzamelen en dan verdwijnen, en u kunt niet langer in contact komen met hen.
- Overmaking van vooruitbetaling naar creditcard
- Maak geen aanbetaling zonder papierwerk dat het proces van het overmaken van het geld bevestigt, als u tijdens de communicatie aan de verkoper twijfelt.
- Overboeking naar een tussenpersoon ("Trustee" account)
- Een dergelijk verzoek zou alarmerend moeten zijn, hoogstwaarschijnlijk communiceert u met een fraudeur.
- Overboeking naar een bedrijfsaccount met een vergelijkbare naam
- Pas op, fraudeurs kunnen zichzelf vermommen als bekende bedrijven, waarbij ze kleine wijzigingen in de naam aanbrengen. Verricht geen geld als de bedrijfsnaam twijfelachtig is.
- Vervanging van eigen gegevens op de factuur van een bestaand bedrijf
- Controleer voordat u een overboeking uitvoert of de opgegeven gegevens juist zijn en of ze betrekking hebben op het opgegeven bedrijf.
Contactgegevens van de verkoper
+358 50 53...
Toon
+358 50 5345498
+358 9 231...
Toon
+358 9 23165797
Oostenrijk 
Oostenrijk, Hörsching
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------